Method of Reduction of Flat Irregularity Obtained During the Process of Filling
DOI:
https://doi.org/10.51699/ijise.v1i3.101Keywords:
minimum distance from the center of the formation to the condensing process, the point of pinning the comb, the combined flow phase push, interpellation, and the funnelAbstract
in this article, the research work was carried out in "Safira-Samira textile" LLC in Bukhara region, joint enterprise of "EURASIYA ALLIANCE TEX" LLC and "CHACH TEX" LLC in Chirchik district of Tashkent region. For it, wick and yarn were produced from a mixture of 10% nitron, 60% cotton and 30% secondary fiber at the production enterprise, and from a mixture of 90% secondary fiber and 10% nitron fiber at the laboratory of the "Spinning Technology" department at TTESI. The quality parameters of the obtained braids and yarns were determined on the equipment of the "CentexUz" laboratory and the "Uster Tester-5" device of the "UZTEX TASHKENT" LLC enterprise, and a method was developed to reduce the unevenness of the obtained braids during the braiding process.
